home *** CD-ROM | disk | FTP | other *** search
- Cognitive Technology Corp. OCR Software
- 100 Larkspur Landing Circle #106
- Larkspur, California, 94939, U.S.A.
- Tel. (415) 925-0707
- Sales:(415) 925-2323
- Fax: (415) 461-4010
- BBS: (415) 925-0733
- Compuserve: 76600,1623
- Internet: ctc@well.com
-
-
- Copyright (C) 1992-1995, Cognitive Technology Corp.
- All Rights Reserved.
-
-
- CONTENTS
-
-
- 1. Hardware and Software Requirements.......................2
- 2. Installation of CuneiForm................................2
- 3. Setting up Scanner.......................................2
-
-
-
- 1. Hardware and Software Requirements
-
- To use Cuneiform in MS Windows 3.1 or higher environments,
- the following minimum configuration is recommended:
-
- * A 386,486 or Pentium PC with at least 4 MB
- (preferably 8 MB) RAM , 4 MB of free space at hard disk
-
- * MS DOS 3.3 or later , MS Windows 3.1 or higher
- with 10 MB permanent swap file running in 386 enhanced mode
-
- 2. Installation of Cuneiform under Microsoft Windows 3.1
-
- * Installation must be done under Windows Program Manager by
- typing <Alt>F(ile), R(un).
-
- * Insert the diskette in a floppy disk drive and run A:SETUP
-
- * The program will request the hard disk drive and directory name
- where the CuneiForm software is to be placed.
-
- 3. Setting up Scanner
-
- * Before you will use a scanner it is nesessary to include your
- scanner driver in your CONFIG.SYS file and reboot your system.
- All scanners are usually sold with scanner drivers. These drivers
- must be compatible with Windows 3.1.
-
-